Compressive Strength 915 kg / per cm ² (13000 psi) ASTM D695 Tensile Shear Adhesion 195 kg / per cm ² (2800 psi) ASTM D1002 (Grit blasted steel) Flexural Strength 635 kg / per cm ² (9000 psi) ASTM D790 Rockwell Hardness 100 ASTM D785 Abrasion Resistance 0.065 ml loss per 1000 cycles ASTM D4060 (CS17 wheel 1 kg load) Heat Distortion Temperature 60 ° C (175 ° F) ASTM D648 Corrosion Resistance ASTM B117 5000 hours HEALTH AND SAFETY As long as is standard practice Observed good Thortex Cerami- Tech FG can be safely used. Should be worn protective gloves. A fully detailed Material Safety Data Sheet is Either included with the equipment or is available on request.
----------------
This comment was translated automatically from Spanish. The Buyer has indicated that responses in English will be considered
Original post:
Compressive Strength 915 kg/per cm² (13000 psi)
ASTM D695
Tensile Shear Adhesion 195 kg/per cm² (2800 psi)
ASTM D1002
(Grit blasted steel)
Flexural Strength 635 kg/per cm² (9000 psi)
ASTM D790
Rockwell Hardness 100
ASTM D785
Abrasion Resistance 0.065 ml loss per 1000 cycles
ASTM D4060 (CS17 wheel 1 kg load)
Heat Distortion Temperature 60°C (175°F)
ASTM D648
Corrosion Resistance 5000 hours
ASTM B117
HEALTH AND SAFETY
As long as normal good practice is observed Thortex
Cerami-Tech F.G. can be safely used.
Protective gloves should be worn.
A fully detailed Material Safety Data Sheet is either included with
the material or is available on request.
----------------